What is the purpose of the Anycubic 3D Printer Print Head Signal Cable?

The Anycubic 3D Printer Print Head Signal Cable is designed to transmit data and power between the printer's mainboard and the print head assembly. This high-quality cable ensures that the communication is clear and seamless, which is crucial for effective printing. If you experience issues with your prints, such as incomplete layers or erratic extrusions, checking the condition of your signal cable can be vital, as a damaged cable can lead to inconsistencies in print quality.

How do I know if I need a new print head signal cable?

Signs that you may need a new print head signal cable include intermittent printing errors, misaligned layers, or failure to heat up correctly. Inspect the cable for visible wear, fraying, or kinks. Often, issues that are attributed to software or calibration can actually stem from a faulty signal cable, so it’s a good idea to troubleshoot this element when facing printing challenges.

Can the Anycubic Print Head Signal Cable be used with other brands of 3D printers?

The Anycubic Print Head Signal Cable is specifically designed for compatibility with Anycubic 3D printers. While it may physically fit other brands, the wiring and signal configuration may not be suitable, leading to potential malfunctions. To ensure safe and optimal operation, it’s best to use the cable designed for your specific printer model.

What should I consider when replacing the signal cable?

When replacing the signal cable, it’s essential to check for compatibility with your specific Anycubic model. Look for the correct length, gauge, and pin configuration to ensure a proper fit. Using the wrong specifications can lead to problems like short circuits or poor signal transmission, which can ultimately affect print performance.

Can a damaged signal cable affect print quality?

Absolutely. A damaged signal cable can lead to erratic behaviors during printing, such as uneven flow of filament, inaccurate temperature readings, or communication drops between the print head and the control board. Such inconsistencies can result in poor print quality or failures, making regular inspections of the cable crucial for maintaining optimal printing performance.

Is there a specific way to care for the print head signal cable?

Caring for your print head signal cable involves keeping it free from physical stress and avoiding exposure to excessive heat or moisture. Ensure that it's not caught in moving parts and handle it gently during maintenance. Proper cable management can prevent tangles or pinches that cause wear over time.

How can I install the Anycubic Print Head Signal Cable?

Installing the Anycubic Print Head Signal Cable typically involves disconnecting the old cable from the mainboard and print head, then connecting the new cable in the reverse manner. Ensure you refer to your printer's manual for any model-specific instructions or diagrams. Taking care during installation will help maintain signal integrity for better print results.

What are some common issues associated with the print head signal cable?

Common issues associated with the print head signal cable include data transmission errors, which manifest as printing glitches, layer misalignment, or extruder motor problems. These can arise from wear or damage to the cable, so keeping an eye out and being proactive about replacement can prevent major printing problems down the line.

How often should I check my print head signal cable?

It’s a good practice to check your print head signal cable during regular maintenance of your 3D printer. Aim to inspect it after every few print sessions or whenever you experience printing issues. Regular checks can help you catch problems early, thereby ensuring your printer continues to operate at peak efficiency.

Where can I buy the Anycubic 3D Printer Print Head Signal Cable in Sweden?

You can purchase the Anycubic 3D Printer Print Head Signal Cable from Ubuy, which offers a variety of 3D printing accessories, including specific parts for Anycubic printers. Their platform makes it convenient to find what you need to keep your printer running smoothly and maintain exceptional print quality.

Hur handlar jag Anycubic 3D Printer Print Head Signal Cable online från Ubuy?

Det är enkelt att handla Anycubic 3D Printer Print Head Signal Cable online från Ubuy.. Du behöver bara söka efter produkten, välja din leveransmetod när du checkar ut och få den levererad till din plats.

Är Anycubic 3D Printer Print Head Signal Cable tillgängligt att handla online i Sweden?

Ja, på Ubuy Sweden är den här produkten tillgänglig för dig att handla till ett rimligt pris.. Anycubic 3D Printer Print Head Signal Cable är inte tillgängligt lokalt men du kan lita på oss med våra expressfrakttjänster.

Hur lång tid tar det att få produkten efter beställningen?

Leveranstiden för din beställda produkt varierar beroende på vad du har beställt och vilken fraktmetod du har valt.. Den beräknade leveranstiden nämns under kassan, så var bekymmersfri när du handlar.

ANYCUBIC Se original

Anycubic 3D Printer Print Head Signal Cable

Factory original wire harness is specifically designed to connect directly to the print head assembly ensuring accurate link stability between components.

ANYCUBIC

Artikelnummer: 144669191

Anycubic 3D Printer Print Head Signal Cable

88% av de svarande skulle rekommendera detta till en vän

Artikelnummer: 144669191

SEK 343

Prisuppgifter

Exklusive frakt- och tullavgifter ( Frakt- och tullavgifter beräknas i kassan )

^{*Alla varor importeras från USA}

Tillgänglighet : I lager

Importerad från butiken USA

Antal:

Beställ nu och få den ungefär på Torsdag, September 17

Säker transaktion

Våra främsta logistikpartners

Factory original wire harness is specifically designed to connect directly to the print head assembly ensuring accurate link stability between components.

U-Care-garanti:

Ingen

Välj en plan

Köp nu, betala senare

Fast
Shipping

Gratis
returrätt^*

Säker förpackning

100% originalprodukter

PCI DSS-efterlevnad

ISO 27001-certifierad

Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Köp nu.

Utmärkande egenskaper

Compatibility

Designed specifically for Anycubic Kobra series, ensuring seamless integration and functionality for Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo printers.

Durable Material

Constructed with high-quality materials to enhance longevity and resist wear, providing a reliable connection for consistent 3D printing performance.

Easy Installation

User-friendly design allows for quick and straightforward installation, making it accessible for both beginners and experienced users to maintain their printer efficiently.

Produktinformation

Connector Type	Usb
Cable Type	USB
Compatible Devices	Kobra 3 Combo 3D Printer
Compatible Phone Models	No Compatible Phone Models
Connector Gender	Male-to-Male
Number of Pins	10
Maximum Voltage	5 volts
Recommended Uses For Product	Connecting 3D printer to print head
Indoor Outdoor Usage	Indoor
Unit Count	1 Count
Number of Items	1
Brand Name	ANYCUBIC
Model	00840432424223
Manufacturer	ANYCUBIC
Global Trade Identification Number	00840432424223
Included Components	3D Printer Accessory
Part Number	FBA-S010232-NEW-2
Brand	ANYCUBIC
Item Weight	0.2 lbs (90 grams)

Vem bör köpa?

Anycubic Owners
Ideal for users of Anycubic Kobra printers needing a reliable replacement for their print head signal cable.
Repair Technicians
Perfect for technicians repairing 3D printers who require compatible wiring for Anycubic Kobra series printers.
Hobbyist Upgraders
Great for hobbyists looking to upgrade or replace faulty printhead wiring to enhance their printing experience.

Other Brands
Not suitable for users with non-Anycubic 3D printers as it is specifically designed for Kobra models.

PRODUKTBESKRIVNING

Anycubic 3D Printer Print Head Signal Cable

Har du någon fråga? Chatta med oss

Kundens frågor och svar

Fråga: Hur handlar jag Anycubic 3D Printer Print Head Signal Cable online från Ubuy?

Svar: Det är enkelt att handla Anycubic 3D Printer Print Head Signal Cable online från Ubuy.. Du behöver bara söka efter produkten, välja din leveransmetod när du checkar ut och få den levererad till din plats.
Fråga: Är Anycubic 3D Printer Print Head Signal Cable tillgängligt att handla online i Sweden?

Svar: Ja, på Ubuy Sweden är den här produkten tillgänglig för dig att handla till ett rimligt pris.. Anycubic 3D Printer Print Head Signal Cable är inte tillgängligt lokalt men du kan lita på oss med våra expressfrakttjänster.
Fråga: Hur lång tid tar det att få produkten efter beställningen?

Svar: Leveranstiden för din beställda produkt varierar beroende på vad du har beställt och vilken fraktmetod du har valt.. Den beräknade leveranstiden nämns under kassan, så var bekymmersfri när du handlar.

ANYCUBIC 3D Printer Accessories Editorial Review

Anycubic 3D Printer Print Head Signal Cable is an essential accessory for connecting your Kobra 3 Combo 3D Printer's print head, featuring a reliable male-to-male USB connector with 10 pins. Users appreciate the ease of installation, noting it as a perfect replacement part that works seamlessly, making the printing process smoother. However, it's important to note that this cable is not compatible with the Kobra 3 Max model. Overall, this product has received positive feedback for its functionality and compatibility, highlighting its efficiency in the realm of 3D printing.

Kundrecensioner & betyg

5.0

1 kunders betyg

5 stjärna

100%
4 stjärna

0%
3 stjärna

0%
2 stjärna

0%
1 stjärna

0%

Recensera denna produkt

Dela dina tankar med andra kunder

Fördelar

Perfect replacement for Kobra 3 Combo
Easy installation for quick setup
Reliable male-to-male USB connector
Efficient connection for 3D printing
Lightweight design for easy handling

Nackdelar

Not compatible with Kobra 3 Max model

Related Categories

Relaterade märken

ANYCUBIC

FYSETC

HIKUDIY

HzdaDeve

SAHVAIM

Xirbbo

RugooSpink

TMYPN

UniTak3D

LANKEGU

HysiPrui

KOYOFEI

ITDKSTYKN

Aladrs

IdeaFormer-3D

REDREX

Rirsoasy

BILIPLE

GRGRG

SeulQirw

Top selling Anycubic 3D Printer Cable in Sweden

Product Image	Product Details
Product Image	Product Name	Brand
	ANYCUBIC Anycubic 3D Printer Print Head Signal Cable \| Connection Wire Harness for Printhead, Compatible with Anycubic Kobra 3, Kobra 3 Combo, Kobra 3 V2, Kobra 3 V2 Combo
	Anycubic 3D Printer Print Head Signal Cable \| Connection Wire Harness for Printhead, Compatible with Anycubic Kobra 3, Kobra 3 Combo, Kobra 3 V2, Kobra 3 V2 Combo	ANYCUBIC
	AHGDFJLH 1pc Print Head Signal Cable,Compatible with ANYCUBIC Kobra S1/S1C - 3D Printer Replacement Accessory
	1pc Print Head Signal Cable,Compatible with ANYCUBIC Kobra S1/S1C - 3D Printer Replacement Accessory	AHGDFJLH
	OMNIHIL OMNIHIL 8FT High Speed USB 2.0 Cable Compatible with Anycubic i3 Mega Pro 3D Printer
	OMNIHIL 8FT High Speed USB 2.0 Cable Compatible with Anycubic i3 Mega Pro 3D Printer	OMNIHIL
	FUNUCURR 4Pin ACE Pro Extension Cable for Anycubic Kobra 3 Combo 3D Printer, 22AWG Copper Core Extension Jumper Cord 1.5M with Tube with Tube
	4Pin ACE Pro Extension Cable for Anycubic Kobra 3 Combo 3D Printer, 22AWG Copper Core Extension Jumper Cord 1.5M with Tube with Tube	FUNUCURR
	L1440mm Type-C Extruder Signal Communication Cable Connection 4PIN-MX3.0 for ELEGOO Centauri Carbon CC2 3D Printer
	L1440mm Type-C Extruder Signal Communication Cable Connection 4PIN-MX3.0 for ELEGOO Centauri Carbon CC2 3D Printer	-
	OMNIHIL OMNIHIL White 8FT High Speed USB 2.0 Cable Compatible with Anycubic Mega S 3D Printer
	OMNIHIL White 8FT High Speed USB 2.0 Cable Compatible with Anycubic Mega S 3D Printer	OMNIHIL
	CJMHFRNK Serial Cable RS-232 Devices Can Be Connected Using A Serial Cable 3D Printer Accessories Compatible with Creality Sonic Pad
	Serial Cable RS-232 Devices Can Be Connected Using A Serial Cable 3D Printer Accessories Compatible with Creality Sonic Pad	CJMHFRNK
	Nilovelygame Type-C Extruder Communication Cable Connection Signal Line Suitable for ELEGOO Centauri Carbon L1380mm CC1
	Type-C Extruder Communication Cable Connection Signal Line Suitable for ELEGOO Centauri Carbon L1380mm CC1	Nilovelygame
	ANYCUBIC Bundle Anycubic PLA 3D Printer Filament 4KG Anycubic Kobra S1 3D Printer Only + 4KG, Peach Pink, Interstellar Violet, Tropical Turquoise, Spring Leaf, Max 600mm/s High Speed High Precision
	Bundle Anycubic PLA 3D Printer Filament 4KG Anycubic Kobra S1 3D Printer Only + 4KG, Peach Pink, Interstellar Violet, Tropical Turquoise, Spring Leaf, Max 600mm/s High Speed High Precision	ANYCUBIC
	L1380mm Type-C Extruder Communication Signal Cable for ELEGOO Centauri Carbon CC1 CC2 3D Printer Partsfor CC1
	L1380mm Type-C Extruder Communication Signal Cable for ELEGOO Centauri Carbon CC1 CC2 3D Printer Partsfor CC1	-

Last Updated on Septembre 1, 2026

Produktens prishistorik

Viktig information

Begränsningar: För produkter som skickas internationellt, observera att eventuell tillverkargaranti kanske inte är giltig; tillverkarens serviceallternativ kanske inte är tillgängliga; produktmanualer, instruktioner och säkerhetsvarningar kanske inte finns på destinationslandets språk; produkterna (och tillhörande material) kanske inte är utformade i enlighet med destinationslandets standarder, specifikationer och märkningskrav; samt produkterna kanske inte överensstämmer med destinationslandets spännings- och andra elektriska standarder (vilket kan kräva användning av en adapter eller omvandlare om det är lämpligt). Mottagaren ansvarar för att säkerställa att produkten lagligen kan importeras till destinationslandet. Vid beställning från Ubuy eller dess dotterbolag är mottagaren registrerad importör och måste följa alla lagar och regler i destinationslandet.
Alla produkter som visas på Ubuy är inte till försäljning, eftersom Ubuy är en global sökmotor. Produkterna omfattas av export-/handelsbestämmelser.

SEK 343

Beställ nu och få den ungefär på Torsdag, September 17

Antal:

Säker transaktion

PCI DSS-kompatibel och ISO 27001:2022-certifierad, med krypterade betalningar och fullt köparskydd på varje beställning.

Våra främsta logistikpartners

Snabbaste gränsöverskridande leverans

Funktioner

Essential print head connection cable for reliable performance.
Compatible with Anycubic Kobra 3 and Kobra 3 Combo models.
Accurate fit for Kobra 3 V2 and Kobra 3 V2 Combo series.
Flat ribbon geometry design ensures optimal wire placement.
Original replacement part restores standard printer connections.
Easy to install with no modifications required.

Ubuy-garantin

Upplev bekymmersfri shopping med 100 % originalprodukter, PCI DSS-kompatibel betalningssäkerhet, ISO 27001-certifierat dataskydd, snabbaste gränsöverskridande leverans, fri retur och säker förpackning på varje beställning.

Anycubic 3D Printer Print Head Signal Cable

SEK 343

Köp nu, betala senare

Fast Shipping

Gratis returrätt*

Säker förpackning

100% originalprodukter

PCI DSS-efterlevnad

ISO 27001-certifierad

Utmärkande egenskaper

Produktinformation

Vem bör köpa?

PRODUKTBESKRIVNING

Relaterade sökningar

Kundens frågor och svar

ANYCUBIC 3D Printer Accessories Editorial Review

Kundrecensioner & betyg

Recensera denna produkt

Fördelar

Nackdelar

Related Categories

Relaterade märken

Top selling Anycubic 3D Printer Cable in Sweden

Produktens prishistorik

Viktig information

SEK 343

Funktioner

Ubuy-garantin

Fast
Shipping

Gratis
returrätt^*